Basic Info.
Application
Clarified Water Pump
Agricultural Irrigation
Flood Drainage
Mining Machinery
Oil Land Machinery
Municipal Project
Fire Fighting
Waste Water Discharge
Industrial Water Supply and Drainage
Sea Water Breeding
Stable Pressure Water Supply System
Remote Intelligent Water Supply
off Duty Control
Transport Package
Plywood Case
Product Description
Product Description
1.The dewatering pump system consists of a self-priming centrifugal pump with semi-open impeller and a Simplex separator where air can separate from the liquid and be sucked by a vacuum pump.
2.The vacuum pump allows the unit to be primed automatically and capable of drawing significant quantities of air, allowing the priming of a wellpoint system and maintaining it under vacuum, or draining an excavation thoroughly under "snore" conditions.
Applications:
| Construction | Industrial | Municipal | Agricultural |
| Mining | Dewatering | Industrial Waste | Sewage |
| Oil Field | Petrochemical | Paper Mills | Processing |
Diesel Engine Water Pump Unit
PUMP INTRODUCTION
Automatic diesel pump can selected by usage places head ,capacity and liquid request ;
According to requirements of matching different working conditions, can choose single-stage suction centrifugal pump , high pressure pump, double suction split casing pump , and so on. Products with advanced technology and a high degree of automatic, superior performance and protection function is complete, reasonable structure, easy to install, cost-effective high when a sudden blackout of the factory, emergency water supply pump set of diesel engine starts automatically add pipe network pressure.
PUMP APPLICATION
Diesel pump set is commonly used for high-rise buildings, water companies, steel mills, wineries, hotels, hospitals, chemical plants,and other projects on emergency water supply.
PUMP USE RANGE
CAPACITY : 10-27000m3/h
HEAD: 10-15000m
PRESSURE: 0.1MPa-150MPa
POWER: 3-2250kw
FOR EXAMPLE(SN-OTS):
Features of SN-OTS type double-suction horizontal split centrifugal pump:
Split case design permits easy disassembly, that is, inspection is simplified. It will not affect the pump casing or disturb the centering alignment of inlet & outlet pipeline when parts replacement is necessary.
The double-suction design has a good suction performance which ensures high suction lift even under the large flow operation condition.
Pump shaft seal can be used for non-cooled packaging seal or non-cooled single face non-equilibrium mechanical seal.
Single-stage double-suction centrifugal pump is a new style energy saving horizontal split pump, for conveying water or other liquid which physical and chemical properties similar to water. According to user requirements, it can be used to transport sediment water or all kinds of corrosive liquid by changing the pump structure and material. This series of pumps are widely used in areas such as factories, mines, city water supply and drainage, power stations, farmland irrigation and drainage, and various water conservancy projects etc.
Diesel Pump
Model | Flow | Head | Revolving
Speed | Inlet
Diameter | Discharge
Diameter | Diesel Engine |
| m3/h | L/S | m | r/min | mm | mm | Power | Model |
| SN-ST150-78 | 162 | 45 | 78 | 2900 | 150 | 100 | 60 | 4BTA3.9-C80 |
| SN-150-50 | 170 | 47 | 47 | 2900 | 150 | 100 | 60 | 4BTA3.9-C80 |
| SN-200-95 | 234 | 65 | 93 | 2900 | 200 | 125 | 123 | 6BTA5.9-C165 |
| SN-200-63 | 288 | 80 | 62 | 2900 | 200 | 125 | 82 | 4BTA3.9-C110 |
| SN-200-42 | 288 | 80 | 41 | 2900 | 200 | 125 | 60 | 4BTA3.9-C80 |
| SN-250-65 | 486 | 135 | 65 | 1450 | 250 | 150 | 163 | 6CTA8.3-G2 |
| SN-250-39 | 486 | 135 | 38 | 1450 | 250 | 200 | 86 | 6BT5.9-G2 |
| SN-250-24 | 486 | 135 | 23 | 1450 | 250 | 200 | 50 | 4BTA3.9-G2 |
| SN-250-14 | 486 | 135 | 14 | 1450 | 250 | 200 | 36 | 4BT3.9-G2 |
| SN-300-90 | 792 | 220 | 90 | 1450 | 300 | 200 | 370 | NTAA855-G7A |
| SN-300-58 | 792 | 220 | 548 | 1450 | 300 | 200 | 231 | NT855-GA |
| SN-300-32 | 792 | 220 | 32 | 1450 | 300 | 250 | 106 | 6BTA5.9-G2 |
| SN-300-19 | 792 | 220 | 19 | 1450 | 300 | 250 | 86 | 6BT5.9-G2 |
| SN-350-75 | 1260 | 350 | 75 | 1450 | 350 | 250 | 470 | KTAA19-G5 |
| SN-350-44 | 1260 | 350 | 43 | 1450 | 350 | 300 | 264 | NTA855-G1A |
| SN-350-26 | 1260 | 350 | 26 | 1450 | 350 | 300 | 163 | 6CTA8.3-G2 |
| SN-350-16 | 1260 | 350 | 16 | 1450 | 350 | 300 | 86 | 6BT5.9-G2 |
FOR EXAMPLE(SN-ZX/ZW):
Specification of our self priming pump
| Model | Size
(inch) | R.P.M.
(r/min) | Max. Flow
(m3/h) | Max. Head
(m) | Suction Lift
(m) | Power
(hp) | Max. Solids
(mm) |
| SN-ZW2 | 2 | 1150-2900 | 46 | 36 | 7.6 | 1-10 | 44.45 |
| SN-ZW3 | 3 | 650-2150 | 107 | 35 | 7.6 | 1-20 | 63.5 |
| SN-ZW4 | 4 | 650-1950 | 163 | 36 | 7.6 | 1-30 | 76.2 |
| SN-ZW6 | 6 | 650-1550 | 330 | 33 | 7.6 | 2-40 | 76.2 |
| SN-ZW8 | 8 | 650-1350 | 600 | 34 | 7 | 7.5-75 | 76.2 |
| SN-ZW10 | 10 | 650-1450 | 775 | 40 | 6.7 | 10-100 | 76.2 |
| SN-ZW12 | 12 | 650-1250 | 1275 | 42 | 4.9 | 20-125 | 50 |
| SN-ZWU3 | 3 | 850-2150 | 85 | 62 | 7.6 | 1.5-25 | 20.63 |
| SN-ZWU4 | 4 | 850-2150 | 148 | 60 | 5.2 | 3-40 | 28.57 |
| SN-ZWU6 | 6 | 850-1950 | 308 | 58 | 4.5 | 5-75 | 31.75 |
Diesel Engine Specification:
| Drive Variation | Cummins, Deutz, Ricardo, Perkins, Chinese Diesel or any others can be specified |
| Power Range | 50HP~1066HP |
| Diesel Driving | Water cooled, air cooled |
| Cylinder | 1, 2, 4 or 6 |
| Cylinder Diameter | 95, 96, 100, 102, 105, 110, 113 etc |
| Displacement | 3.26~9.49L |
| Fuel Consumption | 218, 224, 231, 251.6, 258.4 etc |
| Connection Type | Pin Coupling |
| Installation Way | Diretly coupling engine mounted, horizontal V-belt |
| Skid Mounted on Trailer | 2 wheels or 4 wheels Trailer/Trailor |
Product details:
1. SN Non-clogging Dewatering Pump consists of a self-priming centrifugal pump with semi-open impeller and a simplex separator where air can separate from the liquid and be sucked by a vacuum pump, the max suction head can reach to 9.5m
| Pump Model | YP100 | YP125 | YP150 | YP200 | YP250 | YP300 |
| Standard Pump Body Material | Cast Iron |
| Standard Pump Impeller Material | Stainless Steel |
| Standard Pump Shaft Material | 2Cr13 |
| Bearing Type | Ball |
| Maximum Lift in theory (m) | 9.5 |
| Nominal Speed (rpm) | 1800 |
| Inlet & Outlet Size (mm) | 100 | 125 | 150 | 200 | 250 | 300 |
| Max. Dia Solids Handling Capability (mm) | 20 | 26 | 76 | 76 | 50 | 65 |
| Max. Discharge Head (m) | 32 | 34 | 42 | 53 | 60 | 55 |
| Max. Flow Rate (m3/h) | 150 | 200 | 360 | 540 | 1000 | 1800 |
2. IS Single Stage End Suction Water Pump is for clean water or liquid similar to clean water, with high temperature mechanical seal it can be used to transfer hot water (150 degree celcius). It is used for industrial and city clean water supply and drainage, irrigation, fire protection, water supply, metallurgy, chemical, paper making, etc.
| Working Principle | Standard centrifugal, end suction |
| Casing Material | HT200, SS304, SS316 |
| Impeller Material | HT200, SS304, SS316, Copper |
| Pump Sealing | Packing seal, Mechanical seal |
| Capacity Range | 6.3-400m3/h (27.7-1760US.GPM) |
| Head Range | 125m (410ft) |
| Maximum Diameter | 200mm (8inch) |
3. S/XS High Flow Split Case Water Pump with high capacity and pressure, which can transfer clean water or similar liquids (Oil).
| Working Principle | Centrifugal, Split Case Pump |
| Casing Material | HT200, SS304, SS316 |
| Impeller Material | SS304, SS316, Copper, HT200 |
| Pump Sealing | Packing seal, Mechanical seal |
| Capacity Range | 126m3/h~8520m3/h |
| Head Range | 8m~140m |
| Inlet/Outlet Diameter Range | 6"(150mm)~32"(800mm) |
4. D High Pressure Multistage Water Pump is used system of high-pressure run hot and cold water circulation and booster pumps in parallel water supply of the high rise building, fire, boiler feed water and cooling water systems and a variety of irrigation fluid conveying.
| Working Principle | Centrifugal, Multi-stage |
| Casing Material | HT200, SS304, SS316 |
| Impeller Material | HT200, SS304, SS316, Copper |
| Sealing Type | Packing seal, Mechancial seal |
| Flow Range | 3.75-540m3/h (16.5-2376US.GPM) |
| Maximum Head | 1056m (3463.7ft) |
| Maximum Caliber | 250mm (10inch) |
5. ZX/ZW/SP Self Priming Water Pump is our latest generation product base on US technology and craftwork. It is designed for economical & trouble-free operation in handling solid-laden liquids and slurries.
| Working Principle | Centrifugal, Self-priming |
| Material | Cast iron, ductile iron, stainless steel, cast steel |
| Max. Suction Head | 7.6m |
| Sealing Type | Packing seal, Mechancial seal |
| Solid Passing | 20.63mm-76.2mm (20GPM~5500GPM) |
| Flow Range | 8m3/h~1275m3/h |
| Head Range | 6m~63m |
| Impeller Diameter | 158.74mm~457.2mm |
7. LQRY Hot Oil Pump is suitable for heat-conduction oil, or other hot oils with temperature ≤370°C
| Working Principle | Centrifugal, Hot Oil, Thermal Oil, High Temperature Oil |
| Max. Permissible Fluid Temperature | 370°C (698°F) |
| Casing Material | Cast steel |
| Shaft Sealing Type | Shaft seal ring, Mechanical seal, Carbon seal |
| Flow Range | 4.5-400m³/h (19.8-1760US.GPM) |
| Head Range | 85m (278.8ft) |
8. XBC Diesel Fire Water Pump comprise a combination of electric motor pump, diesel engine pump and jockey pump that used for fire fighting systems. Fire pumps are required to comply with Local Civil Defense Authority regulations and International Codes of Practice e.g. National Fire Protection Association (NFPA).
1.Electric pump: kinds of end suction pump, split case pump, multistage pump.
made of cast iron, stainless steel. Impeller can be bronze.
5.5-710 kw 0.3-1.2 mpa 10-420 l/s (150-6600GPM) |
2.Diesel pump: Flow is the same with electric pump. It connects the pump set with
High elastic coupling or universal joint. It also includes water tank,
oil tank, fans, control screen etc.
7.0-810 kw 0.3-1.2 mpa 10-420 l/s (150-6600GPM) |
3.Jockey pump: Horizontal or vertical, small flow,
head is higher than electric or diesel pump |
| 4.Control panel: Control the pumps automatically with overload, overcurrent protection |
5.Accessories: Check valve, gate valve, pressure tank (0.6mpa, 1.0mpa, 1.6mpa)
pressure gauge, pressure sensors, import and export common pipe, soft joints, flanges and common base. |
There are also IS,OS,SH,D,DG,DM,ZX,ZW,HW,ZJ,ZG,QW,IH,QJ,2SK,2BV,Vacuum pumps, PLUNGER PUMPS,PISTON PUMPS,SCREW PUMPS,MUD PUMPS and so on.
Company Overview:
Weifang Sunny Power Machinery Co.,LTD.
is specialized in manufacture of multiple pumps and other relative power machinery,
integrating the scientific research , development, design ,
manufacture, production, testing, and sales service for many years.
Our company introduce the international advanced production equipment and technology ,
combines the strong technical experience and method ,
develop and research different sorts of pump products.
Continuous innovate the products according to the customers needs,
the products have stable performance and quality.
there are many products are exported to some countries and regions,
won the trust of customers all around the world .
The main production of products:
all kinds of centrifugal pump,
mining industry clear water pump,
boiler feed water pump,
slurry pump,
submersible pumps,
sewage pumps, fire pumps,
vacuum pumps,
water circulation pump,
submersible pumps,
automatic frequency conversion water supply equipment,
sewage disposal equipment,
widely used in metallurgy, coal, mining, power,chemical,
pharmaceutical, city water supply and drainage industry,
plays huge role in the national economic construction.
We sincerely hope :
we can cooperation with the domestic and international friends.
We will try our best to provide the best quality ,
reasonable price and excellent service to every customers.
FAQ:
1 / Q: Are you a manufactory or trading company ?
A: We are water pump manufactory with more than 30 years production experience.
2 / Q: What's your MOQ?
A: Trial sample order is OK .
3 / Q: What's your payment terms?
A: T/T , L/C , D/P, D/A ......
4 / Q: What certificates do you have ?
A: CE , ISO 9001 , UL .....
5 / Q: How about the warranty ?
A: One year warranty for pumps .
6 / Q: What is the delivery time ?
A: 15-30 days according to customer quantities .
7 / Q: Can you do OEM brand ?
A: Yes, Welcome .
8 / Q: How to buy our pumps ?
A: Firstly we should know from you :
What is the fluid ?
Clean water(temperature), dirty water(temperature), particles,or slurry ?
What is the capacity and head ?
The capacity and head range ?
What is the voltage and frequency of three phase electrcity ?
Other conditions from customer if possible : pump type , motor ?
With complete information, then we selected the pump and feedback to you.
If you have special requirement, such material, please inform us .
9 / Q: Quality reliable ?
A: We have cooperated with customers from European, Asia, Africa,
Middle east, Australia, North and south America for more than 20 years,
Quality if life and we observe international standards on each kind of pumps .
10 / Q: How to replace parts ?
A: In the order period, we will list our vulnerable parts and their quantities to
our customer, and sold at competitive price, then ship together with pumps if
customer needs.
FOR MORE QUESTIONS, PLEASE CONTACT OUR SALES MANAGER.
){kind=link}